Hardwood Floor Screen and Recoat

Toll Free Call
Service

You May Not Need A Refinishing - Wood Floor Screen and Recoat Allen County, Indiana

A screen and recoat process is a great way to restore your hardwood floors at half the cost of sanding or restoration in Allen County, Indiana. The refinishing process involves applying one or two coats of polyurethane. Hardwood Floor Screen and Recoat screens/sands off the top layer of finish from the hardwood floors then applies a fresh topcoat. Screening and refinishing consist of abrading the preexisting finish, so that the new coats can bond to the surface. The process removes both superficial scratches also called surface scratches. It can be both a maintenance service or a refinishing process. Our screen and recoat refinishing process removes existing failed finishes down to the wood in order to apply fresh topcoats. 

Keystone Hardwood Floor Care, Inc
screen and recoat 46814

Protecting Your Hardwood Floors

If your floor looks worn, don’t immediately assume it needs refinishing, resanding, or replacement. Give Keystone Hardwood Floor Care a call for an evaluation if you live in Allen County Indiana. You may be surprised how well those wood floors can look!

With our Screening and Recoating service, you can avoid the need for total refinishing and resanding of your hardwood floors. The process does not affect the actual wood or the stain or color of the hardwood floor.

Recoating polyurethane wood floors

The Screen and Recoat Process Provides Added Sheen

Screening and recoating your hardwood floors is a cost-effective way of restoring their luster. Perhaps you’ve been to historic homes with original wood floors that are over 100 years old. Regular buffing of the floors of these homes is a requirement for the owners and caretakers. So can you.

If you have your quality wood floors Screened and Recoated periodically, like the owners of these beautiful old homes, you may be able to postpone refinishing, resanding, even replacement almost indefinitely.

A Screen and Recoat Procedure is a Great Option for Homeowners

A screen and recoat is a great way to update your wood floors. It’s a low cost option that preserves the original unfinished wood. If you’re looking to restore a hardwood floor to its original beauty, screen and recoat is a great option. The procedure will not cost you as much of full refinishing or restoration, and the results can be just a great. You can even tint the color of your hardwood floors with a screen and recoat.

If you have hardwood floors, when should you consider screening and recoating them?
Repairs become necessary when maintenance is neglected.

Screening and recoating are perfect for hardwood floors that:
Scratches on the surface
It has scuff marks
Remains of paint
It has a dull sheen

If you haven’t maintained your hardwood floors in the past 3 to 5 years, now is the time to call Keystone Hardwood Floor Care! Call 260-446-3335.

Types of Floors We Work With

The Screening and Recoating maintenance service is ideal for solid wood floors and engineered wood floors that have been installed and finished in place.

When it seems too late, what should you do?
A Screening and Recoating maintenance service is recommended only for floors with superficial scratches and blemishes. Buffing cannot address deep scratches, discolorations, or areas that are completely unfinished. To fix these problems, we offer full sanding and refinishing.

How long does it take to screen and recoat hardwood floors?
In some cases, the process can be completed in one day, depending on the square footage of the floors. A time estimate must be determined for each case on an individual basis, however.

Additionally, the sizing of the furniture in a furnished room can affect the amount of time it takes to complete the job. We provide a one-day service for up to 1,500 square feet of unfurnished space. We may also be able to handle small furniture-filled locations in a single day.

What does Keystone Hardwood Floor Care Screening and Recoating professional services include?

Step 1: Screening
In screen or buffing, an abrasive pad or screen is used to remove superficial blemishes from the top surface of the old finish without affecting the color underneath. Our buffers are equipped with a vacuum unit that collects dust as it is created, making the process reduce dust.

Step 2: Vacuum
Vacuum the floor thoroughly before applying the finish to ensure that it is ready for it.

Step 3: Finish application
After the floor is buffed/sanded and vacuumed, we apply an eco-friendly water-based polyurethane finish.

Step 4: Drying Time
Following application, the finish is thoroughly dry and ready for light foot traffic in four hours. You can place all furniture parts back in place the same day, ensuring that you place protective pads under any parts that come into contact with the floors

How much does it cost to screen and recoat my hardwood floors?
For finished in place hardwood floors, the average cost of Screening and Recoating hardwood floors is $2.00 per square foot.

REQUEST AN ESTIMATE TODAY! or call us at 260-446-3335

Stay Connected,
With News and Specials

We run specials throughout the year. To save money enter your email below and the deals are yours.