Share on facebook
Share on twitter
Share on pinterest
Share on linkedin

Hardwood Flooring Buffing

Share This Post

Share on facebook
Share on linkedin
Share on twitter
Share on email

Hardwood Flooring buffing is a DIY project that many homeowners take on themselves. In order to know exactly how to go about this project safely, you need to know exactly what Hardwood Flooring is. Basically, what you’re doing is applying fine sandpaper over your floors, then using a hardwound buffing machine to remove any imperfections or scratches. The end result is a uniform, smooth finish on your floors.

Typically, hardwood floors take several hours to properly dry. This is due to the oily finish that makes the wood. It also takes quite a bit of effort to keep your hardwood floors completely free of dirt. Therefore, many homeowners find it best to perform hardwood floors buffing on their own.

There are several different ways that you can buff your wooden flooring. Some homeowners simply use a hard-bristled tool that’s filled with sand paper. Others use a machine that uses a vacuum and sandpaper simultaneously. Still others use a combination of both machines. However, using a simple buffing tool that removes just as much dust as possible is probably the most time efficient. It also allows you to perform the action in a somewhat safe manner.

Before you begin buffing your floors, you should make sure they’re clean and totally dry. If they aren’t, you’ll need to take them outside and let them dry. If you’ve just applied real wood flooring, you’ll also need to let it dry completely. You should never allow water or other liquids to stand near your wooden floors while you buff them. The dust and moisture will inevitably cause scratches.

Buffing your wooden floors will help remove surface scratches and increase their durability. But even with thorough buffing, you may notice some imperfections in the floor. This is okay – it will eventually be repaired. In fact, some of these imperfections are actually repairable. Some people choose to just refinish their floors instead of repairing them, but there are many benefits to repairing your wooden floors if you feel like it.

You may want to buff your wooden flooring before or after sanding it. Sanding hardwood floors helps remove surface dirt, dust, and small specks of debris. But sometimes when the floor is freshly sanded, the surface dirt is so fine that it gets embedded in the tiny nooks and crannies of the wooden floor. To fix this, buff the floor again. A little pressure from your hand works wonders.

Another way to buff your wooden floor is with a hard-wax machine. Most home improvement stores have one, and it’s fairly inexpensive. The machine itself is similar to a sanding machine, except that it comes with a buffer (the part that spins while you buff) and a buffing pad, which can be reused between sanding sessions. You may also have access to specialty accessories, such as brushes and buffing pads that have been pre-applied to your wooden floor to ensure even application.

The point is that a hardwood floor can benefit from some light buffing, especially if you’re just beginning to do your own refinishing. It never hurts to take a look at how other homeowners with your floor have done it. The beauty of this advice is that you can apply the same polish and protection to your floor that they did, without spending a fortune. With a few hours of work in the buffing chair every once in a while, you can restore years of life to your hardwood flooring!

To achieve even greater results, you can combine your hardwood floor buffing efforts with a power sanding machine. These machines work by injecting water at extremely high speeds into your wooden floor, causing the floor to be sudsy and ready to receive the finishing touches. The biggest downside of using these machines is that it can be messy; some homeowners have complained that their floors are still too wet even after several hours have gone by. This isn’t a problem, however, as long as you don’t bring a power sander into the home.

If you’re working on your floors every few months or so, you might be surprised to find out that most homeowners will actually see a lot of signs of wear and tear in their hardwood floors without using these products. Sanding and power sanding can dull your wood over time, but the extra grit will make your floors look new for years to come. It also allows you to remove small imperfections without actually going through the hassle of refinishing the entire floor. If you do happen to sand your hardwood floors often, there’s one useful tool you should always have on hand. A fine-toothed comb will help you get rid of any scratches and smoothen out any scratches that may be present. You can also use the comb to clean out nooks and crannies in the corners of your hardwood floors.

Hardwood floor buffing is a necessary part of keeping your hardwood floors looking great. However, if you’re not experienced enough in this process, it might not be your best bet. For less drastic results, consider hiring a professional to complete this process for you. The cost of a professional refinishing can be much more than what you’d spend on a power sander, especially if you want your floor’s surface to stay in top condition for years to come. When you need something done quickly, buffing your floor is often the only option that offers the benefits you need.

Subscribe To Our Newsletter

Get updates and learn from the best

More To Explore

Hardwood Floor Refinishing Costs

Yes! Dust-free hardwood floor refinishing is available! Many times the hardwood floors you’ve been searching for are already there, ready to be refinished! A professional

Hardwood Floor Refinishing 101

Yes! Hardwood Floor Restoration can save you money and time! Have you discovered a previously lovely hardwood floor underneath some recently removed carpet? Or perhaps