Share:

Share on facebook
Facebook
Share on twitter
Twitter
Share on pinterest
Pinterest
Share on linkedin
LinkedIn

Hardwood Flooring Buffing

Share This Post

Share on facebook
Share on linkedin
Share on twitter
Share on email

Hardwood Flooring Buffing isn’t something that you should tackle on your own unless you want to tear up the entire room. This can be an extremely tricky procedure for those that don’t know exactly what they are doing. If you decide to go ahead and try this, you will definitely need to have some type of light source for when you start. Also be sure to wear a protective coating on your legs and feet because the floor paint could easily get into them and create a nasty rash.

Hardwood Flooring buffing|Hardwood Flooring buffing

Hardwood Flooring Buffing

Hardwood Flooring Buffing isn’t something that you should tackle on your own unless you want to tear up the entire room. This can be an extremely tricky procedure for those that don’t know exactly what they are doing. If you decide to go ahead and try this, you will definitely need to have some type of light source for when you start. Also be sure to wear a protective coating on your legs and feet because the floor paint could easily get into them and create a nasty rash.

}

Hardwood Flooring Buffing is essentially a method which is used to provide your floor with the finest appearance possible. In essence, what you’re doing is placing liquid sandpaper on your hardwood floors, and then using a buffing machine on either side of the floor to remove any excess damage or scratches. If you’re refinishing hardwood floors then you will be doing just that, but with different equipment. The first thing you’ll need to do is locate the furniture in the room you’re refinishing. Remove it and set aside.

Once you’ve got your furniture out you can begin to take it apart. The easiest way to do this is by breaking each piece down into manageable pieces. Start with the legs of the furniture, taking care not to scratch the wood when you do this. If you have any kind of a corner piece, take it out of the frame first, leaving the rest of the piece intact, as you will be working around it.

Once you’ve got all of your wooden floors up you can start with the top layer. Take a damp cloth and wipe your hardwood flooring buffing machine over it. If there is any sign of damage, such as nicks or scrapes, use a damp cloth again to help seal up the damage. Let the hardwood flooring to dry completely before putting anything back on.

Once you’ve got the top layer completely dry, you can move onto the middle and back layers. Start with the most common problem areas, such as the corners of a room, and work your way to the edges. Make sure you sand the wooden floors evenly, because if not you’ll end up masking the imperfections. Depending on your purpose for refinishing your hardwood floors, you may only need to send one or two boards out at a time. If you’re just refinishing the entire floor, be sure to sand them as evenly as you did the others. This will ensure a better finish and minimize the chance of having spots that are oddly-shaped.

For those that are working on a budget, you may want to consider using pre-finished hardwood floor buffing pads. These are often sold in bulk quantities at home improvement stores. They work just as well as the buffing pads you would buy at the store, but you won’t have to wait for them to dry. Many of these come with a sander and are designed to be used in your car or at home. They also come with rubber soles to absorb any squeaking or vibration that’s associated with sanding wooden floors.

You can always invest in an epoxy sanding pad, which can save you a lot of work. Epoxies are applied directly to the scratches without any excess sanding pad work. After applying the sanding compound, you simply let it sit, while gently buffing your wooden floor with a long, fine-grit sandpaper. Using one of these epoxy sanding pads is much less time consuming than employing a sanding pad, which will give you extremely rough finish results.

One last thing to remember about sanding your wooden floor is never to skim. This will cause scratches and marring. Instead, make sure to really sand down the area, making small sections thinner than the rest. The idea is to create a very smooth finish. By making your wooden floor surface thinner, it will be easier to see the smaller imperfections in your design that have been left by the original nails and screws.

Subscribe To Our Newsletter

Get updates and learn from the best

More To Explore

Hardwood Floor Refinishing Costs

Yes! Dust-free hardwood floor refinishing is available! Many times the hardwood floors you’ve been searching for are already there, ready to be refinished! A professional

Hardwood Floor Refinishing 101

Yes! Hardwood Floor Restoration can save you money and time! Have you discovered a previously lovely hardwood floor underneath some recently removed carpet? Or perhaps