Basically, hardwood floor polishing is a way that is used to give your floors that all new look possible without having to take out the existing floor. Basically, what you do here is putting fine sandpaper on your wood floors, adding some liquid wax to it, then utilizing a special polishing machine for the spots that you want to get rid of, and lastly buffing the floors down with yet another polishing machine. It sounds easy enough, doesn’t it? Well, yes, it is easy but there are some other things that you have to do as well. If you want to know how to do it yourself, read on.
First of all, if you don’t know how to start hardwood floor polishing, then you should get a book or two that will help you. There are several good ones on the market and they can save you a lot of time. Some of them also come with videos that can walk you through the whole process step by step. You may want to get more than one so that you have a guide as to where you are going and how to get there.
Start by measuring the areas where you want to have the floors buffed. This is the first step in this process and you may need an assistant to do this. Make sure that the measurements are exact so that you will have a nice even covering on your floors. You need to use a spirit level to measure and check your floors. The spirit level will tell you how much to sand at and will also let you know how many passes you will need to do of your floor buffering.
Start sanding your floors. When you are using a power buffing machine, you may need more passes over your hardwood floors than what you would with a hand powered machine. Look for directions that have the number of passes you should use per inch on them. After all of your passes are done, you will want to clean your floors. You can either use a power vacuum or a soft bristle broom to do this.
For the most part, hardwood floors are fairly easy to take care of. If there is something that you don’t know though, such as how to get your floors looking great, it is best to go to a professional or a DIY guide. If you do find that you are a complete beginner at hardwood floor refinishing though, you have no need to panic. It can still be a pretty easy process.
Hardwood floor sanding isn’t as simple as just lightly sanding your wooden flooring. It is important to use the right equipment. While there aren’t many tools that you will need when sanding your hardwood floors, there are some that you might already own. One of the most important pieces of equipment that you will need is a power sanding machine. There are some that you can buy, but you can also rent. If you have a high quality sanding block, it will help the sanding process.
The last step of refinishing hardwood floors is to wax the floor. This helps protect it from scratches and makes it look great. Make sure that you read the label and follow the directions. You don’t want to damage the wood by using the wrong product. Refinishing hardwood floors can be a big investment, so make sure that you take good care of it. In order to ensure that you will have the longest durability, you will want to apply an exterior coat.
This will help protect your furniture, carpeting, rugs, walls, flooring and anything else that is located on your floor. You can’t refinish hardwood floors like you can hardwood tile, wallboard or even solid cement. These materials need sealants in order to protect them from water damage, stains, wear and tear and humidity issues. A professional hardwood refinisher is able to seal the wood correctly so that you don’t have to worry about these issues.