Hardwood Flooring Buffing is basically a way that is used on hardwood floors to help give the floor the best look possible. Essentially, what you are doing is putting slightly finer sandpaper over your hardwood floors, and using a buffer machine to remove any wear or scratches. After this you will buff the floors with an even finer sandpaper to achieve the best look possible. You can buff your floor by hand, but this takes quite a bit of time and is rather labour intensive. For those just looking for a quick and easy solution, there are several ways to do it yourself at home.
If you have a home office that has wooden floors, it may be in your interest to refinish hardwood floors yourself. There are several ways that you can go about doing this and you won’t need to have a degree in wood work to accomplish a beautiful floor. Basically you are going to buff the entire floor, sanding off anything that may scratch and then applying new floors that are looking better than they ever have before. This is actually a great project for the kids to do as they will get a chance to learn how to refinish wooden floors.
One way that you can do hardwood floor refinishing on your own is to use an electric sander. This is probably the easiest way to go about this process as all you need is a smooth floor surface to sand. Take your time and make sure that you sand the entire floor. It is best to wear protective gloves when doing this process so as not to accidentally sand important areas of the floor. Once you are done sanding place everything back where it was.
One of the most important things that you should do before starting the hardwood flooring buffing process is to get all of the dust off of your hands. This is the first thing that you need to do since if you don’t this will just build up. Get your cloth and begin to wipe the area with it. The more times you do this the better chance you have at getting all of the dust off. You want to start at the top and work your way down. It may take a few minutes to do but it is well worth it.
Now that the dust has been gotten rid of you are going to need to move on to the actual sanding job. Start by turning on the sander and sanding in even strokes. Do this until all of the scratches have been taken out. If some are there you can fill them in with some sand paper to help them out. Be careful not to sand too much though or else you will start seeing chips in your wooden floor.
After this is done you can move on to the next step which is to finish sanding. This is done by using even strokes on both sides of the hardwood floors. Once you have finished, you want to put on some type of finishing material like putty. This will help you seal the edges of your floor and prevent any future scratches from occurring.
After you have finished this step you can go ahead and apply the new refinishing to your hardwood floor. You should always use some kind of finishing material on your wood floors to help prevent any future damage that could happen from the sanding. The biggest reason people have trouble refinishing their wooden floor is because they sanded too much.
Hardwood Flooring buffing can be a bit of a chore at times. It does require you to do a lot of hard work especially when you are trying to get rid of scratches on a wooden floor. However, with these tips you will see that buffing your hardwood floors can be very easy. You do not have to spend hours sanding and refinishing your floor. It is important that you use the proper equipment when you are buffing your wooden floors. This will help you get the job done faster.