Share:

Share on facebook
Facebook
Share on twitter
Twitter
Share on pinterest
Pinterest
Share on linkedin
LinkedIn

Oak Hardwood Floor Refinishing

Share This Post

Share on facebook
Share on linkedin
Share on twitter
Share on email

Hardwood floors should be cleaned using micro fibre, oil, or sandpaper using the grain direction as described on the product packaging. Most hardwood floor refinishing work should not be done with any sandpaper other than the one specified on the package. Sanding hardwood floors should always be done in small batches to avoid damage to the wood. Hardwood floors should be sanded in small batches using even strokes, paying careful attention to the grain of the wood. After hardwood floor refinishing, no matter how small the refinishing may be, it is necessary to protect the wood from future dirt build up and damage. This can be done with hardwood floor wax removal.

Hardwood Floor Refinishing|Hardwood Floor Refinishing

Oak Hardwood Floor Refinishing

Hardwood floors should be cleaned using micro fibre, oil, or sandpaper using the grain direction as described on the product packaging. Most hardwood floor refinishing work should not be done with any sandpaper other than the one specified on the package. Sanding hardwood floors should always be done in small batches to avoid damage to the wood. Hardwood floors should be sanded in small batches using even strokes, paying careful attention to the grain of the wood. After hardwood floor refinishing, no matter how small the refinishing may be, it is necessary to protect the wood from future dirt build up and damage. This can be done with hardwood floor wax removal.

}

All hardwood floors should be vacuumed after hardwood floor refinishing to remove all dust particles. Vacuuming should be done with a brush attachment or in loose cloths to remove the dust particles quickly. Sanding hardwood floors should be done at least three times, with each cleaning passing a longer distance in the direction of the grain of the wood. It is important to use the same pressure and the same hardwood floor sandpaper that were used during the hardwood floor refinishing process.

Most homeowners choose dustless hardwood floor sanding and refinishing because it is less time consuming than traditional methods. With dustless hardwood floor sanding and refinishing there is no need to apply a protective coating. With dustless hardwood floor sanding, no preparation is required for the floor. Hardwood floors are easy to refinish once they have been sanded, but this does not mean you do not have to take extra care of them. There are still several steps you need to take to ensure you get the most out of your hardwood floor restoration project.

You will need to work over the stains to remove them, especially if there are any oil stains. Oil stains can also be removed with sandpaper. If you find that the water damage is not so severe, you can use a small amount of rubbing alcohol to help get rid of the excess water. This is especially helpful if the hardwood flooring stain has been sitting on the hardwood for a long time.

The next step in hardwood flooring refinishing is to skim the surface you are working over with a fine-grit sandpaper to remove loose debris. Do not be too aggressive with the sandpaper; you do not want to chip the wood. If you find that most of the wood has been removed, then you can proceed with the refinishing process. Depending upon how much flooring has been removed, this may not be an easy process.

After the hardwood sanding process, you can proceed with the air quality restoration. This step requires you to remove any floor mats, carpet remnants, or other items lying on the floor. It is very important to take all of these items off of the floor. Once you have taken everything off of the floor, spray it down with the appropriate dustless sanding system. You should avoid using a drum sander unless you are certain that you have enough pressure to easily remove all of the dust and particles.

After the sanding process, you should proceed with the application of the hardwood floor finishing. Make sure to apply at least two coats of a hardwood floor coating. These coats will protect the wood from becoming damaged through chipping over time. For best results, use a sander that will give you enough pressure to finish the job in less than one hour. You can apply as many layers as necessary until the entire floor has been sanded to the point of it becoming as smooth as possible.

If you are interested in refinishing oak hardwood flooring, there are many different methods available. You can purchase either pre-finished or unfinished boards. You can also purchase engineered flooring if you want to be able to change out parts of the floor to give it a new look. Oak hardwood flooring should make a beautiful addition to any home. You should contact a local hardwood flooring company for more information and to determine the best way to refinish oak flooring.

Subscribe To Our Newsletter

Get updates and learn from the best

More To Explore

Hardwood Floor Refinishing Costs

Yes! Dust-free hardwood floor refinishing is available! Many times the hardwood floors you’ve been searching for are already there, ready to be refinished! A professional

Hardwood Floor Refinishing 101

Yes! Hardwood Floor Restoration can save you money and time! Have you discovered a previously lovely hardwood floor underneath some recently removed carpet? Or perhaps